The Beats X is a popular choice among music enthusiasts, offering high-quality sound and a sleek design.
However, like any electronic device, it may encounter issues from time to time.
One common problem that users face is the Beats X flashing red and white lights.
This article will provide you with eight fixes to resolve this issue and get your Beats X back to normal functionality. So, let’s dive in and explore the solutions!
Why is My Beats X Flashing Red and White?
The Beats X flashing red and white lights may occur due to several reasons:
Low Battery: When the battery level is low, the lights flash to indicate the need for charging.
Software Malfunction: Outdated firmware or software glitches can cause the lights to flash. Update your Beats X to the latest firmware and software.
Physical Damage: Check for visible damage like frayed cables or a bent charging port, which can trigger the lights. Seek professional help for repair.
Charging Issues: Ensure you use compatible charging accessories. Faulty chargers can lead to flashing lights.
Resetting and Pairing: Perform a reset and ensure proper pairing with your device to resolve any connectivity issues.
Wireless Interference: Other devices or networks in the vicinity can disrupt the Beats X. Move away from potential sources of interference.
How to Fix Beats X Flashing Red and White
Fix 01: Check the Battery Level
The first step in troubleshooting the Beats X flashing red and white lights is to check the battery level.
The insufficient charge can cause various malfunctions. Connect your Beats X to a power source and ensure that it is charging properly.
Leave it connected for a sufficient amount of time to ensure a full charge.
Once fully charged, disconnect the device and check if the flashing lights have disappeared.
Fix 02: Reset Your Beats X
Performing a reset can often solve many issues with electronic devices. To reset your Beats X, follow these steps:
- Press and hold the power button for 10 seconds.
- Release the power button when the LED indicator starts flashing red and white.
- Wait for a few moments until the lights stop flashing and the device powers off.
- Power on your Beats X again and check if the flashing lights have been resolved.
Fix 03: Update Firmware and Software
Updating the firmware and software of your Beats X is important for its smooth functioning.
Sometimes, if the firmware or software is outdated, it can make the device act strangely.
To fix this, make sure your Beats X has the latest firmware. Also, check if your connected device, like a smartphone or computer, has the most recent software updates.
You can visit the Beats website or use the official Beats app to see if there are any updates available.
If there are, just install them, and your Beats X will be up-to-date and working great!
Fix 04: Clean the Charging Port
A dirty or obstructed charging port can lead to connectivity issues, which may trigger the flashing lights on your Beats X.
Use a soft-bristled brush or a clean, dry toothbrush to gently remove any dust or debris from the charging port.
Be careful not to damage the port during the cleaning process. Afterwards, try charging your Beats X and see if the issue persists.
Fix 05: Check for Physical Damage
Inspect your Beats X for any signs of physical damage that may be causing the flashing lights.
Look for frayed cables, loose connections, or bent pins in the charging port.
If you identify any damage, it is advisable to contact the Beats support team or an authorized service centre to get professional assistance in repairing or replacing the damaged parts.
Fix 06: Try a Different Charging Cable and Adapter
Sometimes, the issue lies with the charging cable or adapter rather than the Beats X itself.
Use a different charging cable and adapter that are compatible with your device to eliminate the possibility of a faulty charger.
Connect your Beats X to the new charger and observe if the flashing lights still persist.
Fix 07: Perform a Factory Reset
If none of the previous solutions has resolved the issue, you can try performing a factory reset on your Beats X.
Please note that a factory reset will erase all your device settings and paired connections. To perform a factory reset:
- Ensure your Beats X is turned off.
- Press and hold the power button and volume down button simultaneously for 10 seconds.
- Release the buttons when the LED indicator flashes red and white.
- Your Beats X will reset to its factory settings.
- Pair your device with the Beats X again and check if the flashing lights issue has been resolved.
Fix 08: Contact Beats Support
If you have tried all the previous fixes and the problem still persists, it is recommended to reach out to the Beats support team for further assistance.
They have the expertise to diagnose the issue and provide you with the necessary guidance or initiate a repair or replacement process if required.
Visit the Beats website or consult your device’s documentation for the support contact details.
Conclusion
To fix the Beats X flashing red and white lights, try these quick solutions: check the battery, reset the device, update firmware, clean the charging port, inspect for damage, use a different cable/adapter, perform a factory reset if needed, or contact Beats support.
By following these steps, you can resolve the issue and enjoy your Beats X without the flashing lights.
Leave a Reply